Name: TipTeh d.o.o.
Address: Ulica Ivana Roba 23, Ljubljana, 1000, SI
Telephone: +38612005150
Price range: €€

Safety switch with separate actuator
Thermoplastic enclosure
Integrated AS-Interface
40 mm x 220 mm x 50 mm
3 LEDs to show operating conditions
Sensor technology permits an offset between actuator and interlock of ± 5 mm vertically and ± 3 mm horizontally
Intelligent diagnosis
With door detection sensor T
Protection class IP67

SKU

4030661524351
Manufacturer code

103027843
Type of Execution, IP Protection class, General

IP67
IP66
Type of Execution, Mechanical life, minimum,

1000000 Operations
Height, Sensor

220 mm
Length, Sensor

50 mm
Width, Sensor

40 mm
Housing material

Glass-fibre, reinforced thermoplastic
Standard, standards

EN ISO 14119
EN ISO 13849-1
EN IEC 61508
EN IEC 62026-2
EN IEC 60947-5-3
PIM maintenance status

Discharge "Online catalog"
PNV, standard, certificates

cULus
TÜV
ASi-SaW
FCC
IC
ANATEL
Electrical data, Terminal, Connector, Transmitter, General

Connector plug M12, 4-pole, (A-coding)
Safety parameter

EN ISO 13849-1
EN IEC 61508
EN IEC 62061
SAP, basic quantity unit

Piece
SAP, EAN (European Article Number)

4030661524351
SAP, product group

Initial
SAP, gross weight

354.570 g
SAP, net weight

351.570 g
Included in delivery, number and type, general

Actuator must be ordered separately.
Temperature, Ambient temperature[generated product variant]

-25 ... +65 °C
Temperature, ambient temperature, maximum

65 °C
Temperature, ambient temperature, minimum

-25 °C
Voltage, Rated impulse withstand voltage

0.8 kV
Voltage, rated insulation voltage

32 VDC
Web Type

Product range
Coding, Coding level according to EN ISO 14119

Low
Movement, actuating speed, maximum

0.2 m/s
Type of Execution, Degree of pollution IEC/EN 60664-1

3
Type of execution, mounting, Screws

2x M6
Type of Execution, Overvoltage category IEC/EN 60664-1

III
Height, permissible installation height above sea level, maximum

2000 m
Force, Latching force

30 N
Note, tightening torque, screw, housing cover

Torx T10
Number, Actuating directions

2
Temperature, storage and transport temperature,[generated product variant]

-25 ... +85 °C
Temperature, storage and transport temperature, maximum

85 °C
Temperature, storage and transport temperature, minimum

-25 °C
Torque, tightening torque, screw, housing cover, maximum

1.0 Nm
Torque, tightening torque, screw, housing cover, minimum

0.7 Nm
Selection (Yes/No), Traceparts

Yes
Selection (Yes/No), CADENAS

Yes
Electrical Data, Inputs, AS-i, Channel 1

Data bits DI 0 / DI 1 = dynamic code transmission
Electrical Data, Inputs, AS-i, Channel 2

Data bits DI 2 / DI 3 = dynamic code transmission
Electrical Data, AS-i, Input module address

0
Electrical data, AS-i, Profile

S-0.B.F.E
Electrical Data, AS-i, Specification

Safety-Slave
Electrical data, AS-i, Version

V 3.0
Electrical data, Connector, AS-i, PIN 1

AS-Interface +
Electrical data, Connector, AS-i, PIN 2

n.c.
Electrical data, Connector, AS-i, PIN 3

AS-Interface -
Electrical data, Connector, AS-i, PIN 4

n.c.
Electrical Data, Device protection, AS-i

Internal short-circuit proof
Note, Electrical data, AS-i, Input module address

Preset to address 0, can be changed through AS-interface bus
Note, Electrical data, AS-i, Parameter bits

FID: periphery error
Note, LED switching conditions display

(2) LED red: Internal device error
(3) LED yellow: Device condition
Status and diagnostics: Transmitter + receiver
Note, operating voltage, AS-i

Protection against polarity reversal
Note, rated operating voltage, ASi

Protection against polarity reversal
Review, Coding, AS-i, ID-Code

0xB
Review, Coding, AS-i, ID-Code1

0xF
Review, Coding, AS-i, ID-Code2

0xE
Review, Coding, AS-i, IO-Code

0x0
Time, Reaction, maximum

100 ms
Voltage, Operating voltage, AS-i, maximum

31.6 VDC
Voltage, Operating voltage, AS-i, minimum

26.5 VDC
Voltage, rated operating voltage, ASi, maximum

31.6 VDC
Voltage, rated operating voltage, ASi, minimum

26.5 VDC
Voltage, type, ASi

DC
Selection (Yes/No), Integral System Diagnostics, status

Yes
Recommendation, actuator

AZ/AZM201-B1
AZ/AZM201-B30
Coding, general information

Universal coding
Review, Resistance to vibrations to EN 60068-2-6

10 … 150 Hz, amplitude 0.35 mm
Review, restistance to shock

30 g / 11 ms
Time, Duration of risk, maximum

200 ms
Time, Time to readiness, maximum

4000 ms
Selection (Yes/No), latching

Yes
Selection (Yes/No), Safety functions

Yes
Type of application, Relative humidity, maximum

93 %
Note, Relative humidity

non-condensing
non-icing
Power, transmit, RFID, maximum

-6 dB/m
Time, Switching frequency, maximum

1 Hz
Type of application, Relative humidity [generated produtct variant]

10 ... 95 %
Current, consumption, AS-i, maximum

100 mA
Electrical data, AS-i, A/B Slave, Parameter bits, P2

Enabling inhibit (tamper protection time) active (FID)
Electrical data, AS-i, Parameter bits, P0

Safety guard and actuator detected
Electrical data, AS-i, Parameter bits, P1

Static 0
Electrical data, AS-i, Parameter bits, P3

Internal device error (FID)
Electrical data, Outputs, AS-i, DO 0

No Function
Electrical data, Outputs, AS-i, DO 1

No Function
Electrical data, Outputs, AS-i, DO 2

No Function
Electrical data, Outputs, AS-i, DO 3

No Function
Time, frequency band, RFID

125 kHz
Torque, tightening torque, screw, mounting, maximum

8 Nm

This product is unavailable

This product is currently unavaliable, this could be due to a limited stock shortage, or because of discontinuation or replacement. For more information please contact us at b2b@tipteh.si.
Manufacturer Schmersal